How to Analyze Damage or Laptop Computers

How to Analyze Damage or Laptop Computers

on this occasion, I will discuss about how to analyze the computer. although this article is just the translation, may be useful and can help your problem




laptops and computers are the most common devices used to perform office work. Laptops and computers will facilitate our work such as typing, create letters, counting, edit pictures and create work presentations. But the more often a laptop or computer dgunakan then sometimes the computer or laptop is also having problems such as: the laptop could not run, laptop or computer has crashed, laptop bluescreen or even experienced death total.

Damage to the laptop can be categorized into two, namely: heavy damage and minor damage. If the laptop was severely damaged as a total dead then I suggest to bring it to a computer expert or computer services. However, if a laptop or computer suffered only minor damage, of course we can fix it ourselves. At this time I will share tips and how to analyze the damage to the laptops and computers.

1. Recognize indicators and signs that appear when the computer is first turned on.

Recognizing indicators and symptoms that appear when first turned on is very important, because the indicator which appears to be a reference to analyze the damage and steps to correct it as: code beep or warning message on the screen. Beep code could be a clue if perngkat having problems such as: video card, lan card, RAM, motherboard and processor. Beep beep code will usually match the type used bios so each - each have bios beep codes vary.

Meanwhile, if there is an error message on the screen is usually accompanied by written warnings, among other things: "hard drive failure", "the blue screen appears". The easiest way you can try and check off the corresponding peripheral.

2. Monitor Screen dark and the indicator light remains on.

Once the laptop or computer is powered of course, we will observe the symptoms that appear on the device. If the laptop is powered on but the monitor screen darker or no display at all, it usually happens on the LCD screen damage us. However, to ensure that we could use another monitor or external monitor if we are using a laptop.

LCD itself is divided into three parts: a flexible, inverter and the LCD itself, if the flexible cable having problems we can check to wiggle the cord, if a glimpse of a display on the screen then this indicates that damage to the flexible. However, if the damage to the LCD inverter and then we have to replace with a new one because the inverter and LCD together.

3. Laptop can not be in charge

If the laptop can not ces cas possibility of damage to the laptop or other devices on the motherboard that the IC power motherboard and Jack Power.

if the laptop is experiencing a case like this, the steps are to try it first with another charge. If you still can not make a charger then the possibility of damage to the power jack or IC power. To perform a check on the power jack or IC power we have to disassemble the laptop.

4. laptop or computer can not boot

If the laptop or computer can not boot / it can not touch and can not enter the operating system, then there are two possibilities, namely: damage to the software and hardware damage. If damage to the software steps we can do to repair the operating system in use or if it still can not be the easiest step is to reinstall the operating system.

If problems with the hardware so we can check on the device hard drive, RAM or VGA Card. To see the problems on our hard drive can go to the bios and make sure the hard drive is still detected on our laptops. If the RAM then we can remove the RAM and clean it and then reinstall it or try RAM installed in another slot.